Showing posts with label project three. Show all posts
Showing posts with label project three. Show all posts

Wednesday, 10 September 2014

ccdn 331

Modern New Zealand design culture is precedented from globalization rather then the New Zealand heritage.


Globalisation was a new concept that developed since the middle of last century and has accelerated in the last 25 years. This evolution of change has seen to increase interdependence between the global societies (McLennan, McManus & Spoonley, 2010) and in my opinion; it is precedential and influential on the modern design industry in our country. The New Zealand design culture has benefitted from globalization, as it is a positive precedent for helping the design culture and industries onto the world stage with technology advances, the internet, marketing opportunities and mass production manufacturing. Throughout the world, New Zealand has been associated with commodities such as wool and wood for decades and this positively enhances our clean, green, out door positive stereotype that enhance the marketing and influences on the design industry. Globalisation plays a huge part in world today; this is due to international trade and the subsequent influences on the economy and advancing technologies also play a big part in the design industry. Manufacturing, mass production, the internet, computer based technologies and the global markets are just some factors that make globalisation a major section of the modern design culture.

I feel that design has its only visual language that shouldn’t be isolated to separate counties and cultures and globalization has provided and will continue to provide a positive way to break language barriers across our developed world. It is a positive benefit in bringing the global design together, to extend technologies and future design paths.  Mass production manufacturing processes were developed in the early 1900’s and at that time, most factories where located in the country where the product was designed in, such as America and the United Kingdom. Over time this pattern has changed and today most of the worlds design products are mass-produced in China and India (Bryson & Rusten, 2010). This change has evolved due to cheaper labour and the space and resources to produce a wide variety of products in the Asian counties. When discussing the progression of change towards globalization, Van Deursen (1995) said that as the manufacturing of design changed from domestic to international to multinational to full globalization; the changes in product perceptions must also have the ability to communicate to the broad international consumer mix.

Global manufacturing is seen to have been used to increase global value chains, to increase the rate of technology extraction, to increase the acknowledgment in people and skills and to move to a low-carbon economy (Bryson & Rusten, 2010). Within this I consider that technologies are also always advancing and in the global design industry companies need to be aware of the new technologies entering the market and know how it could either benefit or affect their companies. In the modern design culture the new technology of 3D printing is a growing part on modern designs and designers are faced with considering how to make new ways to incorporate this new technology. The Internet is a large part of modern design globalization as most information is accessible all over the world and with this designs published and showcased on the internet can be easily used as precedents for global designers. Prior to the Internet with very accessible information and international concepts, New Zealand based designers were not so influenced by designers in foreign countries. Without such a high speed internet based communication that is available these days, there wasn’t such a vast and broad based selection of design projects and plans available as part of the precedents that local designers can now develop their work from.

In modern design marketing emphasizes the Global Market, Bryson and Rusten (2010) indicated that even though design is the main role in the product and the consumption; marketing and brand creation is how a brand creates and manipulates customer demand not the design of the product. I consider that this concept needs to be a paramount factor in the design culture of New Zealand.  Globalization means that we now live in a thoroughly interconnected world, this means that what happens in other parts of our world, has a deeper and faster impact on what happens at ‘home’ than previously. With this interconnected world and constant and greater international influences via the Internet on how we design; globalization is seen to even blur the boundaries between ‘home’ and ‘elsewhere’ (McLennan, McManus & Spoonley, 2010)

Design is such a broad industry with a wide variety of specialties, which include computer fields linked with graphic or game design, electronics linked with lighting or constructing 3D printing devisers, through to workshop tools such as lathes, routers and laser cutters. Industrial design includes ergonomics, product performance, aesthetics and the relationship between the product and the consumer (Bryson & Rusten, 2010). I consider that today’s design culture is influenced by both past examples of global designs and our countries’ culture. New Zealand is known for its kiwi ingenuity and innovative thinking; we also take pride in our clean green image. But as New Zealand is still seen as a relatively ‘new country’ we are more open to adopting other cultures and designs into our work. New Zealand is a multi cultural country integrating a lot of European and Pacific customs and social norms into our culture. In the design industry we use our New Zealand commodities to help promote our designs such as New Zealand woods and merino wool to create our high-end design products even though the designs themselves have be adapted from past precedents of global designs.

As part of the research for this assignment I have considered the history of design from Greek Neo Classism, Italian Renaissances, Art Nouveau, Bauhaus, Art Deco and Pop Art. These designs did not originate in New Zealand but in my opinion they still all interrelate and act as precedents for the New Zealand design culture. When considering the Greek designs such as Acropolis and their temples these were built around 500BC, which was thousands of years before people settled in New Zealand. However, I think that they are an example in history where people copied and developed designs from these monumental architectural buildings, and these can be seen in the design of buildings and monuments throughout our country. These simple geometric designs are still incorporated today throughout the developed world due to the strength and aesthetics these design appeal. Archeologist have found clay bowls and plates from ancient Greece dating back to around 100BC still similar shapes and sizes that are used today, it shows how some “classic” designs haven’t changed over time, but the using new materials has developed as technologies have advanced.
Over time styles have developed and changed around the world. In my opinion these changes have been due to social and economic changes in the different cultures and sub-cultures and this has influenced the appearance and technique used to make the design. Examples of these are the Bauhaus design, which is reflecting, in pre-war Germany or how the Pop Art reflected the changes in social norms, protocol and freedom. Like most aspects of the developed world, design is ever changing with the expression on the world and the sub cultures of the designers.

Taylor (2010) stated in a New Zealand Herald interview  "Understanding the different historical elements that are built into something gives you different references to choose from when you are deciding how to use it - whether it is a piece of furniture, a textile or whatever" (cited Telford, 2010) I have noticed that some small things in the New Zealand design culture that most people wouldn’t even notice are a form of globalization:  An example of this is with “Citta Designs”, a New Zealand furniture and home wear design store, that seasonally brings out a new line of products that have been inspired by a different part of the world such as Greece, India or New York. Mixing the New Zealand design culture with other cultures of the world through imaging, colours, textiles and patterns (Citta, 2014). This mix of cultures targets the New Zealand market which helps indicated the multi cultural aesthetic of the New Zealander perspective.

I consider that most New Zealand designs aren’t based on historical references, but they are more seen as novelty art pieces. In my opinion this is because design based around New Zealand heritage wouldn’t have a high chance of being showcased on a global scale. As noted before marketing plays a large roll in the global market of design; even though this could cause some controversy within the design industry this does need to be a factor of consideration as marketing doesn’t identify the designers of the product, but the brand behind the product. This market and brand focus is the way the modern world is currently organised as the economy and income are deemed essential, and seen as a higher focus than who designed the item or concept in the more economically developed countries. “We now have an economy powered by human creativity, in virtually every industry, from automobile to fashion, food products, and information technologies itself, the winners in the long run are those who can create and keep creating” (Florida, 2002: 5).

New Zealand still has its own style in design but it still looks to globalization for input on where and how to move forward and analyzing how other countries are finding new ways to push the boundaries and create attention. As out lined previously we are known for using our commodities for creating our design for example the ZESPRI and Scion spife that is made from bio plastic material that incorporates kiwifruit residues, this is not only a new breakthrough material but it help represents the positive stereotype that New Zealand is ‘Clean and Green’ by making environmentally friendly deposable spife (The ZESPRI biospife, 2013). While in fashion design, New Zealand designers are using merino wool as material, helping to promote the New Zealand sheep and wool industry as a world-renowned diverse fabric with such companies as “Ice Breaker”. The design of these clothes may be similar designs to other global outdoor and sport clothing brands, but its advantage on the global market is the use of New Zealand merino wool (Icebreaker, 2014). 

Design and other Visual Media should enhance and promote the idea of globalization in their communication; as they have their own language that can be expressed between different countries, cultures and languages, as there are no verbal barriers with design as it is an interesting mix of different materials, aesthetics, manufacturing types and product purposes that are used as communication. Through globalization it increases interdependence between the global societies. As part of this assignment I have considered websites that share designs on its database such as the Shapeways Market Place where different users can upload their 3D printable files onto the database and other users can pay for them to be printed. This process is a positive outlook on the benefits of globalization and one aspect as to how the Internet can help countries with language barriers communicate through design. Shapeways is a company that allows people from all over the world to upload their 3D printable designs and offer 12 different material options such as sandstone, plastic and sterling silver to print your designs (Shapeways, 2014). Companies like Shapeways help demonstrate the positive effects on globalization in the design culture as anyone around the world can use the facilities and can see what other users have produced and subsequently extend their personal design concepts and projects. When considering a New Zealand company SketchChair I learnt that this organization has created a website that allows people the independence to design a digitally fabricated chair to fit their personal ergonomics and personal preference. (SketchChair, 2011), this is another example of positive globalization in the New Zealand design culture.

Globalization is such a dominant focus and integral aspect in the modern developed world and it is only increasing with the use of new technologies and the creation of new internet interacting sites and in my opinion this brings people from all over the world closer. Current New Zealand designers are more influenced by the global market with the high-speed access of information on the Internet than previous generations that were more influenced by verbal communication, photos, books or television. Future designers will have an even greater influence from globalization as the technology is further developed and I consider that this will be a more influential precedent in design throughout the future decades. New Zealand is a multicultural society and seen as a “new country” when compared with European or Chinese cultures. With this limited wealth of heritage in the design culture the introduction and subsequent growth in globalization over the last 25 years, this has been very influential for New Zealand designers and added to how we promote our designs the global market. I consider that this has enhanced New Zealand branding internationally and added to our economy. I believe that the New Zealand design culture should continue to embrace globalization as a way of advancing knowledge and extend the limitations on a global scale, as it provides a wonderful medium to connect with other countries where language is not a hindrance and the various aspects of each culture contributes to the precedents for our future designs.

Bryson, J. R., 1963, & Rusten, G. (2010). Industrial design, competition and globalization. Basingstoke, UK; New York: Palgrave Macmillan.

Citta Design. (2014). Our story. Retrieved from http://www.cittadesign.com/our-story

Florida, R. (2002). The Rise of the Creative Class and how it’s Transforming
Work, Leisure, Community and Everyday Life. Basic Books, New York.

Icebreaker. (2014). Icebreaker New Zealand merino wool clothing and apparel. Retrieved from http://nz.icebreaker.com

McLennan, G., McManus, R., Spoonley, P., (2010). Exploring Society (3rd ed.). Auckland, New Zealand. Pearson.

Sciences Learning. (2013, May 20). The ZESPRI biospife. Retrieved from http://www.sciencelearn.org.nz/Innovation/Innovation-Stories/Biospife/Articles/The-ZESPRI-biospife

Shapeways. (2014). About us. Retrieved from http://www.shapeways.com/about?li=footer

SketchChair. (2011). About Us. Retrieved from http://www.sketchchair.cc/about.php

Telford, D. (2010, September 10). History in the making. Retrieved from http://www.nzherald.co.nz/lifestyle/news/article.cfm?c_id=6&objectid=10671935

Van Deursen, G. (1995). The globalization of design. Appliance Manufacturer, 43(3), 10.



Wednesday, 16 October 2013

1000 words


Comfort and tying your shoelaces

From research it is suggested that there are two different types of comfort, psychological and physical. "Comfort is a pleasant state of psychological and physical harmony between a human being and his or her environment" (Slater, 1985). Psychological is where you are comfortable with the surrounding mentally, you feel reassured and safe; it plays off your memories, trust and relationships. This type of comfort takes a long time to create and is studied a lot with nurse where they try to create an environment for a patient to feel comfortable. Comfort with nurses is described ‘that comfort is the overall role that nurses have to focus on and to achieve this they have to first identify patients’ perceptions of their needs’ (Orlando, 1961), it is also the process to developing a close relationship with the patient which can result in healing and growth (Hall, 1964). A study by Elizabeth Tutton (2004) outlined how nurses perceive comfort and how they create comfort for their patients, the study showed that comfort was an individual process in which every one is different, and the staff needed to find out the patients wants and wishes to fulfill them. It was found that the patients felt more comfortable when the nurses had more positive attributes such as; kindness, gentleness, goodness and friendliness. It was found that comfort was also created when the nurse knows the patient, their background, likes and dislikes and simple facts about them, as this created a sense of normality.

Physical comfort is identified where you feel comfortable from and physical product or service. This type of comfort is taken for granted as people only feel comfortable after discomfort (Farrell, 2009) and this comfort is only temporary and last a short amount of time. I understand that this comfort only last for the length of the kinetic movement such as rubbing a soft surface, once you have stopped rubbing the soft surface the comfortable sensation stops. Physical comfort is integrated in industrial design with projects such as creating a chair that is comfortable, rather than an uncomfortable chair. “There are at least three design issues that need consideration in striving for comfort; Firstly, the exact cause of discomfort or comfort is unknown; there is no model available that describes the cause of comfort. Secondly, every individual has his or her own meaning of comfort, as it is a subjective phenomenon. Thridly, the comfort design process is not described and the approach is unknown" (Vink, 2005).
When considering comfort, Looze et al. (2003) described that there were three manifestations for considering: "Discomfort: the participant experiences discomfort because of physical disturbances in the environment. No discomfort: the participant is not aware of discomfort or comfort or there is no discomfort. Comfort: the participant experiences noticeably more comfort than expected and feels comfortable."  Looze et al, (2003:p 990) .The model explains the different factors that interact on resulting the design of the object, creating different manifestations; it described that you not only had to feel physically comfortable but other factors acted influence this, such as temperature, humidity, noise, state of the person, history and smell. "The history of our comfort experiences determines our expectations of a product based on what we are used to" (Looze et al. 2003: p991) this links to the physiological aspects of comfort and person memories. A study by Zhang et al. (1996) found that the absence of discomfort did not result in comfort. It showed that discomfort was associated with pain and if that was taken away then nothing was experienced, while comfort is related to the sense of well being and the pleasure the chair gives; discomfort highlights more physical aspects, such as pain, ache, hurting while comfort shows more of the mental aspects such as feeling happy, relaxed, safe, calm and restful. 

My interpretation with regard to these two different two types of comfort is the concept of time; as it takes a long time to create a safe, relaxed, comfortable environment to generate the sensation of mental comfort. Where as, physical comfort only lasts a few seconds, and when you stop moving, smelling  or listening to the experience of physical comfort, you then lose the focus on comfort and will then only consider comfort again when the action or product is deemed uncomfortable. The factor of time then becomes a big issue of making the experiment, as you have to allow for time to create both mental and physical comfort. 

A theory was devised; it was important to have two parts of the experience. As humans, we take the physical aspects of comfort for granted and because of this it is not practical to create physical comfort only to try to prevent physical discomfort. Preventing physical discomfort will act as a catalyst to creating physiological comfort. Making a comfortable environment using memories, safety, relaxation and positive attributes will create physiological comfort.

I wanted to make an experience to represent the actions of putting on and tying your shoes in a comfortable way. I feel that comfort is simple but meaningful, it’s a feel that you don't want to over power as then I feel it loses its meaning, so I wanted an experience that doesn’t have too many gadgets.


Initially I created an environment to prevent physical discomfort by using soft fabrics and textures such as fur, satin and having soft padding in the shoe. I enlarged the action of tying your shoes to emphasize what is being done; I still wanted to keep it in the feet region. I feel that is a main part of the act of putting on your shoes is the bending down so there is that connection will use your whole body.  I wanted this part of my experience to show a large amount of comfort, as I feel I there is more of a physical comfort rather then a mental comfort to tying up your shoes (and mostly touch) In making this I used soft materials, two soft pieces of padding were sewn together that can be laced up, this covered the whole leg making the experience more enlarged. These soft materials prevented an uncomfortable experience physically and also manipulated the actions on tying up your shoes. Also lined the bottom with a soft fur fabric to create physical comfort and it also created a warm environment inside that helped to make it more psychologically comfortable.

To create physiological comfort I will look at smell, the visual look of the experience and the way I act when presenting it. Vink (2005) reported that even though we are mostly not aware of the effect that smell has on us with comfort it actually influences our experiences. Therefore smell can trigger past memories and if the memory is comforting it can stimulate the feeling. Personally the smell of lavender is comforting so I used the aroma on the object to help stimulate the physiological sense of comfort. Another physiological comfort factor is the visual look of the object; this plays on the idea on memory and history with other objects. I felt an object looks comfortable with the shapes the form creates, soft, fluid, rounded shapes and also the colours used. As I was trying to keep the model simple and not over powering I made the whole model pure white and used soft fluid fabrics to make it so it looks comfortable before sitting on it and using it. Nurses fundamentally use comfort as part of their professional work, I wanted to try and use their type of personality of make the experience more mentally comfortable being; friendly, gentle and kind. Time is also an important factor of comfort, for this the experiment was kept short and simple as I felt that the user would start loosing the comfortable feeling if it kept going for too long, so it only lasted about two minutes.

Hall L.E. (1964) Nursing – What is it? The Canadian Nurse 60, 150– 155.
James J Farrell. (2009). Comfort. The Clergy Journal, 85(3), 46.

Looze, M.P. de, Kuijt-evers, L.F.M and Dieen, J.H. van (2003), sitting comfort and discomfort and the relationships with objective measures. Ergonomics, 46:985-997

Orlando I. (1961) The Dynamic Nurse–Patient Relationship: Function, Process and Principles. G P Putnam’s Sons, New York.
Slater, K. (1985) Human Comfort, Springfield IL: Charles C. Thomas.

Tutton, E., & Seers, K. (2004). Comfort on a ward for older people. Journal of Advanced Nursing, 46(4), 380-389. doi:10.1111/j.1365-2648.2004.03005.x

Vink, P. (2005). Comfort and design: Principles and good practice. Boca Raton: CRC Press.

Zhang, L. Halander, M.G. Drury, C.G. (1996). Identifying factors of comfort and discomfort in sitting. Human Factors, 38(3): 377-389

photos





The design.

I want to make an experience to represent the actions of putting on and tying your shoes in a comfortable way. I feel that comfort is simple but meaningful, its a feel that you don't want to over power as then i feel it loses its meaning, so I want an experence that dosent have to many gadgets.

  •  my first part is to enlarge the action of tying your shoes to emphasize what is being done, I still want to keep it in the feet region as I fell that a main part of the act of putting on your shoes is the bending down so there is that connection will using your whole body. really wanted this part of my experience to show a large amount of comfort, as I feel i there is more of a physical connection rather then a mental connection to tying up your shoes (and mostly touch) I wanted to have a stronger connection with the prevention of physical discomfort in this part of the experience. in making this I will use soft materials, two soft paddings sewn tougher that can be laced up, this would cover the whole leg making the experience more enlarged, to make this I will make it from two pillows and three pillowcase all sewn together, two of the cases will hold the pillows and the other will act as the tongue will large satin ribbon to tie it up. all of these soft materials will prevent an uncomfortable experience physically and also manipulate the actions on tying up your shoes. I will also line the bottom of the incasing with a soft fur fabric the will create an initial physical comfort and it also create a warm environment inside the helps to make it more comfortable
  • when tying up your shoes you normally sit down, so I feel that the sitting down part of the experience is quite important, to prevent discomfort i will have the chair ergonomically comfortable  with the average sitting hight for the average sized person, to prevent pain and ache. I will also add padding to the chair to had even more support. the touch, warmth and ergonomics are all used to prevent physical discomfort. 
  • To create physiological comfort I will look at smell, the visual look of the experience and the way I act when presenting it. in one of the reading I found it explained that smell was a good way to crate comfort as it can trigger past memories and if a comforting memory will stimulate the feeling, I wanted to use this Idea as I personally find that the smell of lavender is a comforting smell, So I will cover the object in lavender oil to crate the memory. 
  • another physiological comfort factor is the visual look of the object, this plays on the idea on memory and history with other objects. I feel an object looks comfortable with the shapes the form creates, soft, fluid, rounded shapes and also the colours used, my personal preference on comforting colours are warm colours such as yellow, orange and white. as I am trying to keep the model simple and not over powering so I feel I will make the whole model pure white and will use soft fluid fabrics to make it so it looks comfortable before sitting on it and using it. 
  • when looking at how nurses use comfort, it is in their actions, even though it is over a long period of time for them to create their time of comforting actions to their patients i want to try and use their type of personality of make the experience more mentally comfortable; friendly, gentle, kind and friendly.
  • time is also a factor that I feel it a big part of comfort, I want to keep it short and simple as we take comfort for granted I feel that the user would start loosing the comfortable feeling it I keep it going for to long, so it should only last about 2 minutes.

comfortabel experience

After doing readings on both psychological and physical comfort and looking at the difference of comfort and discomfort I found that the psychological accept played a more fundamental part of creating comfort then a physical object, as it was easier to determine wether an object was my physically uncomfortable or not uncomfortable rather then determining if it was comfortable due to comfort being a subjective phenomenon (Vink, 2005) and also we take physical comfort for granted as physical comfort is stronger after discomfort (Farrell, 2009).

There are two parts I want to portray in my experience

First I want to create an environment to prevent discomfort physically, such as;


  • Using soft fabrics and textures such as fur, or satin and having soft padding that works ergonomically. Also colours that are deemed warm like orange, white or yellow
  •  a warm environment with temperature and and humidity. 
  • Also prevent pain, ache, numb hurting and other discomfort sensations. 
  • consider the ergonomics and posture to the experience, will they be standing or sitting, will it have support or not?
second I want the experience to be psychologically comfortable;

  • use a smell that will bring comfort in the use of memory and history, I personaly see the smell of lavander as comforting as I relate lavender with going to sleep, when I couldn't sleep when I was a kid my mother used to rub lavender on my chest and wrist to help me relax, so now when I smell it I relaxed which I fell is a sense of being comfortable. 
  • create a safe, relaxing, calm and restful environment 
  • when presenting show positive attributes of, kindness, gentleness, goodness and friendliness
  • think about the history behind peoples experiences of putting on shoes and use the idea of memory to create a comfortable environment 
I feel that it is important to have two parts of the experience, my theory is that you can't create physical comfort only try to prevent physical discomfort as we as humans take the physical aspects of comfort for granted. so preventing physical discomfort will only act as a catalyst to creating physiological comfort, this will then be created by making a comfortable environment using memories, safety, relaxation and positive attributes. 


Monday, 14 October 2013

Comfort

From doing readings I found that there are two different types of comfort mental and physical. mental is where you are comfortable with the sorundings mentally, you feel  reassured and safe, it plays off your memories, trust and relationships. This type of comfort takes a long time to create and is studied a lot with nurse where they try to create an environment for a patient to feel comfortable. while physical is where for feel comfortable from and physical product or service this type of comfort is taken for granted as people only feel comfortable after discomfort and this comfort is only temporary and last a short amount of time, I feel that it only last the length of the kinetic movement such as rubbing a soft surface, once you have stopped rubbing it and just leave you hand on the surface you no longer feel the comfortable sensation, this style of comfort is used in industrial design, such as chair making where you are not trying to create comfort but prevent discomfort.


I feel that the main difference between these two types of comfort is time as mental comfort takes a long time to create a comfortable environment I feel would take a few days to create the mentally comfortable environment while physical comfort only lasts a few seconds as when you stop moving/smelling/listening you lose the focus on comfort and will then only consider comfort again when the the action or product is deemed uncomfortable. the factor of time then becomes a big issue of making my experiment as you have to get the time just right to try to create mental and physical comfort.


Physical Comfort:
Vink, P. (2005). Comfort and design: Principles and good practice. Boca Raton: CRC Press.


To get a better under standing on physical comfort I read a book by Peter Vink- Comfort and Design.
it book when into great detail on the principles to create a comfortable chair and environment. Vink described comfort as 'freedom from pain; well being', there is at least three problems face us in striving for comfort; 1. the exact cause of discomfort or comfort is unknown, there is no model available that describes the cause of comfort. 2. every individual has his or her own meaning of comfort. comfort is a subjective phenomenon. 3. the comfort design process is not described and the approach is unknown." and 'the product its self can never be comfortable; it becomes comfortable (or not) in its use." This then shows that it is difficult to create an environment or product that is deemed comfortable to ever user. Vink looked into a study by Slater (1985) who "defines comfort as a pleasant state of physiological, psychological and physical harmony between a human being and his or her environment "this shows that for product and physical comfort we also have to factor in the mental aspects of comfort it was also stated "the history of our comfort experiences determines our expectations of a product based on what we are used to" (looze et al. 2003 (comfort and design) which relates back to the physiological aspects of comfort and how it relates back to memory. Vink also described that there was three manifestations when considering making comfort;
"Discomfort- the participant experiences discomfort because of physical disturbances in the environment.
No discomfort- the participant is not aware of discomfort or comfort or there is no discomfort.
Comfort- the participant experiences noticeably more comfort than expected and feels comfortable."
when trying to consider where the user would lie with the different manifestations when using the product Looze et al. (2003) created a model to show the different factors that can action on resulting in the different manifestations;
it described that you not only had to physically feel comfortable but other factors acted on it such as temperature, humidity, noise, state of the person, history and smell, it was reported that even though we are mostly not aware of the effect that smell has on us with comfort it actually influences our experiences. 
The book went into detail on the comfort and discomfort specific to seating and how people experienced comfort in their seats, studies where found that the absence of discomfort did not result in comfort. it showed that discomfort was associated with pain and if that was taken away then nothing was experienced, while comfort is retaliated to the sense of well-being and the pleaser the chair gives; 
discomfort highlights more physical aspects, such as pain, ache, hurting while comfort shows more of the mental aspects happy, relaxed safe, calm and restful.

Vinks Theory on comfort changed my views on Physical Comfort, even though I know it is hard to create a physical object that is deemed comfortable in the sense of touch as comfort is a Subjective experience I can try to create an experience that could create an experience that results in safety, restfulness, happiness and being relaxed with a physical object it will result in the objects making a comfortable experience. 


Physiological comfort:
 I found that it is very difficult trying to find information on psychological comfort that can be related to design. I found that there is research that has been done with in nurses to help create a comforting environment for their patients, I felt that this could help to relate to the design world. it was described that comfort is the overall role that nurses have to focus on and to achive this they have to first identify patients’ perceptions of their needs (Orlando, 1961). it is also the process to developing a close relationship with the patient which can result in healing and growth (hall, 1964). 

I found a study buy Elizabeth Tutton who looked it to the relationship between elderly people and their nurses in a ward and try to make it more comfortable for them. (Tutton, E., & Seers, K. (2004). Comfort on a ward for older people. Journal of Advanced Nursing, 46(4), 380-389. doi:10.1111/j.1365-2648.2004.03005.x)  As a whole didnt relate on what I was trying to find out about physiological comfort but it give some good insight on how nurse perceive comfort and how they create comfort for their patients, The study showed that comfort was an individual process in which every one is different, and staff find out the patients wants and wishes and tries to fulfill them. it was found that the patients felt more comfortable when the nurses had more positive attributes such as; kindness, gentleness, goodness and friendliness. if was found that comfort was also created when the nurse know the patient, their background, likes and dislikes and simple facts about them, this was because knowing the person created a sense of normality and community. The environment provided is also deemed as an important factor in creating comfort, as the patients are in the ward for a long period of time they have to create a space which is welcoming and personal, we the patient can have their own space. comfort is also created in every day activities such as helping to wash someones hair or cutting their nails, also helping assist them in knowing what is happening like providing a mirror so they can see their injuries heal.
this studied show the long term ways to create a comfortable environment and playing on the physiological aspects on comfort, even though I don't have the time to lean the background to the tutors and find out their likes and dislikes and base this experience over the space of a few weeks caring for them and providing their wants and wishes, I could use some of the concepts of what nurses use to create comfort an make a lot shorter experience.